CH18 Chipper

‍

Despite its small size, the CH18 disc chopper is an effective tool for landscaping willows, branches and canopies. The feeder is equipped with a hydraulic feed roller, which is rotated by its own hydraulic motor. With the help of a feed roller, it is easy to get the branches on the blades. The feed hole of the chopper is 18 cm x 22 cm.

The pruned ranga also produces good quality energy chips. It is recommended to rotate the chopper with a force output of 1000 rpm. This results in sufficient blowing power, uniform wood chips and better output. The piece size is adjustable in steps 10 mm,12 mm and 14 mm

Limited Time Special Offer Available On The Farmi CH18 Chipper

‍

Optional Accessories:

• Belt gear (double speed)
• Double disc
• Universal joint
• Replacement Blades (4pcs)